Ricoh IM C530 Series - Messages that Appear When There Is a Problem with the Certificate

Message Cause Solution and reference
"LDAP server
authentication has failed.
Check the settings."
The user name or
password is incorrect.
Select the user in the address book, press
[Edit], and specify the correct user name and
password in [User Management / Others] tab
[User Management] [LDAP
Authentication Info].
See "Registering a User in the Address Book
and Specifying the Login Information", User
Guide (Full Version).
Messages that Appear When There Is a Problem with the Certificate
Message Cause Solution and reference
"Signature cannot be set
because the Digital
Signature's device
certificate is not currently
valid."
The device certificate
used for the digital
signature in PDF or
PDF/A is not currently
valid.
Use a valid device certificate for the digital
signature in PDF or PDF/A.
See "Scanning an Original as a PDF with
Security Setting Specified", User Guide (Full
Version).
"The destination cannot
be selected because its
encryption certificate is
not currently valid."
The user certificate
(destination certificate)
has expired.
Install a new user certificate.
"Encrypting Network Communication",
Security
"The group destination
cannot be selected
because it contains a
destination with a
encryption certificate that
is not currently valid."
"Transmission cannot be
performed because the
encryption certificate is
not currently valid."
When Other Messages Appear
241