9. Specifications for The Machine
Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the back side of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
Region A and Region B symbols
(mainly Europe)
(mainly North America)
Differences in the functions of Region A and Region B models are indicated by two symbols.
Read the information indicated by the symbol that corresponds to the region of the model you are
using.
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your machine.
(mainly Europe)
If the label contains the following, your machine is a region A model:
• CODE XXXX -27
• 220–240 V
(mainly North America)
If the label contains the following, your machine is a region B model:
• CODE XXXX -17
• 120–127 V
243
To Next Page
Loading...
