Loading Paper into the Bypass Tray
Use the bypass tray to load paper of a size that cannot be loaded into Tray 1 to 5, such as label paper
(adhesive labels).
The maximum number of sheets you can load into the bypass tray depends on the paper type.
page 162 "Recommended Paper Sizes and Types"
• Do not stack paper over the limit mark. If you load paper over the limit mark, the print image may
be slanted or the paper may be jammed.
1. Open the bypass tray.
When loading paper larger than A4 or 8
1
/
2
× 11 size, pull out the extender.
2. Load the paper with the print side up, and push it in lightly until you hear a beep.
Fan sheets before loading so that multiple sheets of paper do not stick to each other and are not
fed at once.
When loading envelopes or letterhead paper, confirm the orientation, face and back, or location
of flaps.
• page 170 "Envelope Orientation and Recommended Status"
• page 172 "Loading Orientation-fixed Paper or Two-sided Paper"
7. Adding Paper and Toner
156
To Next Page
Loading...
