Replacing the Waste Toner Bottle
The waste toner bottle needs to be replaced soon when the "Waste Toner Bottle is almost full." message
is displayed. Prepare a replacement waste toner bottle.
See "Contact Information", User Guide (Full Version).
Replace the waste toner bottle while watching the video displayed on the screen for the procedure.
1. Press [Watch Video].
To display this screen again, press [Check Status] and then press [Check] under "Mach. Status" on
the [Mach./Applic. Stat] tab.
2. Press the play ( ) key.
3. Replace the waste toner bottle by following the procedure shown in the video.
Precautions When Replacing the Waste Toner Bottle
• Do not store toner (new or used) or toner containers while toner is inside in a place with an open
flame. The toner can ignite and result in burns or fire.
• Do not leave the following items in a place where children can reach them:
• Toner (new or used)
• Toner containers while toner is inside
• Toner-attached parts
Replacing the Waste Toner Bottle
181
To Next Page
Loading...
