Ricoh IM C530 Series - Specifying a Custom Size for the Original

Specifying a Custom Size for the Original
To copy a custom size original, specify the horizontal and vertical sizes of the original in numeric values.
1. Measure the vertical (Y) and horizontal (X) lengths of the original.
Y
X
DZB577
X
Y
X
Y
2. Press [Copy] on the Home screen.
3. Press the paper tray select key to select a paper tray to use.
4. Press [Original Size].
If the key is not found, select it from [Original Setting].
5. Press [Custom Size].
6. Enter the values of X and Y that you measured in Step 1.
Specifying a Custom Size for the Original
55