When a Message Appears While Using the
Fax Function
• When confirming or changing the settings in [Settings], press [Home] ( ) after closing [Settings].
Messages that Appear During Operation or When Sending/Receiving a Fax
Cannot Be Performed
Message Condition Solution and reference
"Error occurred, and
transmission was
cancelled."
An original had jammed
while sending a fax.
Press [Confirm], remove the jammed original,
and then send the fax again.
An error occurred
temporarily in the
machine, or there was
interference on the line
such as excessive noise
or cross-talk.
Press [Confirm] and send the fax again.
"Memory is full. Cannot
scan more. Transmitting
only scanned pages."
The memory is full. Press [Confirm] to return to the stand-by state
and start sending the pages that are already
scanned and stored. Check the transmission
result report for unsent pages, and send those
pages later.
"Some invalid
destination(s) contained.
Do you want to select
only valid
destination(s)?"
A folder destination is
included in the group.
When sending a fax to a destination other than
a folder destination, press [Select].
• When the JPEG/PDF file that is attached to an e-mail is sent to the machine, check the message
and resolve the problem accordingly.
• page 210 "When a Message Appears While Using the Printer Function"
When a Message Appears While Using the Fax Function
201
To Next Page
Loading...
