Sound pattern
*1
Condition Solution
Five short beeps
(repeating five times)
[Warning Sound] Check the message displayed on the
screen, and resolve the problem by
removing the jammed paper or
original, or replacing the toner.
12 short beeps [Blank Page Detected Sound] Check that the original is placed in
the ADF with the side to scan facing
up.
*1
The factory default sound pattern is used as an example in the table above.
• You cannot pause an alert sound that has started. The machine continues to emit the sound until the
preset sound pattern is completed.
• You can specify the volume and type of alert sound in [Settings] [System Settings] [Sound].
The type of sound can be specified for each condition described in the table above. You can also
specify the volume of the sound emitted when using On-hook or Immediate Transmission to send a
fax in [Settings] [Fax Settings] [Others] [Adjust Sound Volume]. Press [Home] ( ) after
specifying the settings.
• See "Setting the Sound Volume and Type", User Guide (Full Version).
8. Troubleshooting
186
To Next Page
Loading...
