Item Specifications
Protocol SMB
• You can use SMB protocol (139/TCP, 137/UDP) or CIFS
protocol (445/TCP) for sending folders with SMB.
• The Scan to Folder function with SMB protocol (139/TCP, 137/
UDP) is enabled under NetBIOS over TCP/IP environment only.
• You cannot use the Scan to Folder function with SMB under
NetBEUI.
Output format TIFF, JPEG, PDF, High Compression PDF, PDF/A
• When you select [PDF], [High Comp. PDF], or [PDF/A] for the file format, you can attach a digital
signature. You can also specify the security settings for [PDF] or [High Comp. PDF].
• See "Scanning an Original as a PDF with Security Setting Specified", User Guide (Full Version).
• To specify High Compression PDF for the PDF type, the following settings are required:
• Selecting [Gray Scale] or Full Color for [Black & White] under [Send Settings]
• Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Send Settings]
• Selecting other than [Preview]
• Specifying [PDF File Type: PDF/A Fixed] under [Settings]
[System Settings] [Settings for
Administrator] [File Management] to [Off]
Network TWAIN Scanner
Item Specifications
Scanning resolution • When using the exposure glass: 100–1,200 dpi
*1
• When using the ADF: 100–600 dpi
*1
Protocol TCP/IP
Operating system • Windows 7/8.1/10
• Windows Server 2008/2008 R2/2012/2012
R2/2016/2019
(TWAIN scanner runs in 32-bit compatible mode on a 64-bit
operating system, so TWAIN scanner is not compatible with 64-bit
applications. Use 32-bit applications. IC card Authentication System is
not compatible with 64-bit operating system.)
*1
The maximum resolution depends on the scan size.
9. Specifications for The Machine
258
To Next Page
Loading...
