5. Specify the destination.
• To enter the fax number manually, select the destination from the destination history, or search
for the destination in the address book, press , and specify the destination. You can also
enter the fax number manually by pressing .
You can select only the destination entered using the numeric keypad from the history.
• To specify the destination again, press .
6. Press [Start].
To cancel transmission after scanning the original, press [Stop] and operate in [Job Status]
[Transmission Standby File].
See "Confirming and Handling a Document in the Fax Queue", User Guide (Full Version).
• If the telephone line you are connected to requires time to connect to the public line after you dial
the external number, enter a [Pause] after entering the number to specify the time to wait before
dialing the number. The machine pauses for about two seconds for each single [Pause] entered.
3. Fax
72
To Next Page
Loading...
