2. Display the [Devices and Printers] screen.
Windows 10 (version 1703 or later), Windows Server 2019
1. On the [Start] menu, click [Windows System] [Control Panel].
2. Click [View devices and printers].
Windows 10 (before version 1703), Windows Server 2016
1. Right-click [Start], and then click [Control Panel].
2. Click [View devices and printers].
Windows 8.1, Windows Server 2012/2012 R2
1. On the Charm Bar, click [Set] [Control Panel].
2. Click [View devices and printers].
Windows 7, Windows Server 2008 R2
1. On the [Start] menu, click [Devices and Printers].
Windows Server 2008
1. On the [Start] menu, click [Control Panel].
2. Click [Printer] on [Hardware and Sound].
3. Click [Add a printer].
• For Windows 7 and Windows Server 2008/2008 R2, click [Add a printer] and then [Add a
network, wireless or Bluetooth printer].
4. Click [The printer that I want isn't listed].
5. Select [Add a local printer or network printer with manual settings], and then click [Next].
6. Select [Standard TCP/IP Port] on [Create a new port:], and then click [Next].
7. Enter the IP address of your machine in [Host Name or IP address].
8. Clear the [Query the printer and automatically select the driver to use] check box, and
then click [Next].
Searching for the TCP/IP port starts.
When the [Additional port information required] screen is displayed, select [RICOH Network
Printer C model], and then click [Next].
9. Click [Have Disk...]
[Browse...] to specify the driver (INF file), and then click [OK].
The driver is stored in the [DISK1] folder in the folder that was created when unzipping the
downloaded file.
10. Select a printer driver to install, and then click [Next].
11. Enter the printer name as necessary, and then click [Next].
Printer driver installation starts.
12. Specify the printer as a shared printer as necessary, and then click [Next] [Finish].
4. Print
94
To Next Page
Loading...
