Ricoh IM C5510A - Page 232

8. Troubleshooting
230
8
Message
Condition
Solution and reference
"Network
communication has
failed. Failed to
send. The specified
address is invalid."
[14-34]
A domain name was
not specified when
sending an e-mail
without using the
SMTP server.
• Specify a host name or IP address as
the destination, and send the e-mail
again.
• When you specified the destination
from the address book, select the
destination in the address book,
press [Edit], and then check the
settings in "Send via SMTP Server"
and "SMTP Authentication Info" in
[Destinations] tab [Email
Address].
See "Sending Internet Faxes without
Using SMTP Server", User Guide (HTML).
"Network
communication has
failed. Fax email
account is not
registered. Please
check settings."
[15-02]
[Fax Email Account]
is not specified.
Specify the settings in "User Name" and
"Password" in [Settings] [Fax Settings]
[Detailed Initial Settings] [Fax
Email Account].
"Network
communication has
failed. Fax email
address is not
registered. Please
check settings."
[15-03]
[Fax Email Account]
is not specified.
Register Email Address in [Settings]
[Fax Settings] [Detailed Initial
Settings] [Fax Email Account].
"Network
communication has
failed. No response
from the
destination. Please
check the cable
connection and if
the network
equipment is
turned on."
[13-39]
The destination
device did not
respond.
• Check that the computer specified as
the destination is operating normally
and connected to the network.
• Check that the machine is connected
to the network correctly.