Ricoh IM430 Series - Page 115

14. Press [User Tools] ( ) on the top right of the screen.
15. Press [Home] ( ) at the bottom of the screen in the center.
To change the fax number
1. Press [Change] under "Fax Destination".
2. Enter a new fax number using the number keys, and then press [OK].
To select line for fax number
1. Press [Select Line] under "Fax Destination".
2. Select the line to use.
3. Press [OK].
To program the SUB Code for fax number
1. Press [Adv. Features], and then press [SUB Code].
2. Press [Change] under "TX SUB Code".
3. Enter a new SUB Code, and then press [OK].
4. To change the password, press [Change] under "Password (SID)".
5. Enter a new password, and then press [OK].
6. Press [OK].
To program the SEP Code for fax number
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter a new SEP Code, and then press [OK].
4. To change the password, press [Change] under "Password (PWD)".
5. Enter a new password, and then press [OK].
6. Press [OK].
To set the International TX Mode for fax number
1. Press [Change] under "International TX Mode".
2. Select [Off] or [On], and then press [OK].
To select the fax header for fax number
You can register the fax header in Program Fax Information in the system settings for Facsimile
Features.
1. Press [Change] under "Fax Header".
2. Select between [1st Name] and [10th Name] or [Option Setting at TX], and then
press [OK].
Basic Procedure for Fax Transmissions (Memory Transmission)
113