Printing on Envelopes
Configure the paper settings appropriately using both the printer driver and the control panel.
Configuring Envelope Settings Using the Control Panel
For details about how to configure the settings for each tray, see "Changing Paper Size Settings" or
"Specifying the Paper Setting for the Bypass Tray", For First-time Users.
When changing the settings, select the appropriate paper weight for the envelopes loaded in the tray.
After configuring the envelope settings on the control panel, configure the printer driver settings.
For details, see page 138 "Printing on Envelopes Using the Printer Driver".
Printing on Envelopes Using the Printer Driver
Before configuring envelope settings in the printer driver, configure the control panel settings.
For details see page 138 "Configuring Envelope Settings Using the Control Panel".
1. Click the menu button of the application you are using, and then click [Print].
2. Select the printer you want to use.
3. Click [Preferences].
4. In the "Document Size:" list, select the envelope size.
When using the PCL 5e printer driver, click the [Paper] tab, and then select the bypass tray in the
"Input Tray:" list.
5. In the "Input Tray:" list, select the paper tray where the envelopes are loaded.
6. In the "Paper Type:" list, select [Envelope].
7. Change any other print settings if necessary.
8. Click [OK].
9. Start printing from the application's [Print] dialog box.
4. Print
138
To Next Page
Loading...
Need help?
General
