Ricoh IM430 Series - Canceling a Fax Transmission; Canceling a Transmission before the Original Is Scanned; Canceling a Transmission While the Original Is Being Scanned; Canceling a Transmission after the Original Is Scanned

Canceling a Fax Transmission
This section explains how to cancel a fax transmission.
Canceling a Transmission Before the Original Is Scanned
Use this procedure to cancel a transmission before pressing [Start].
When Using the Fax Application
About how to use the application's screen, see page 76 "[Fax] (standard) Screen".
Canceling a Transmission While the Original Is Being Scanned
Use this procedure to cancel scanning or transmitting of the original while it is being scanned.
If you cancel a transmission using the standard memory transmission function, you need to follow a
different procedure to cancel the transmission. See page 117 "Canceling a Transmission After the
Original Is Scanned".
When Using the Fax Application
About how to use the application's screen, see page 76 "[Fax] (standard) Screen".
Canceling a Transmission After the Original Is Scanned
Use this procedure to cancel a transmission after the original is scanned.
You can cancel transmission of a file while the file is being sent, stored in memory, or if it fails to transmit.
All the scanned data is deleted from memory.
Canceling a Fax Transmission
117