• File Name
Press [File Name], enter a file name, and then press [OK].
• Password
Press [Password], enter a password, and then press [OK]. Re-enter the password for
confirmation, and then press [OK].
• Select Folder
Press [Select Folder], specify the folder in which to save the stored files, and then press [OK].
8. Press [OK].
9. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
For details, see "Scan Settings", Scan.
10. Press [Start].
Checking a Stored File Selected from the List
This section explains how to preview a file selected from the list of stored files.
1. Press [Select Stored File].
2. Specify the folder in which the file you want to check is stored.
5. Scan
162