3. Press [To Scanning Screen].
4. Press [Target Fldr. to Store].
5. Specify a folder in which to store the document, and then press [OK].
6. Press [User Name].
7. Select a user name, and then press [OK].
The user names shown are names that were registered in the Address Book. To specify a name not
shown in the screen, press [Manual Entry], and then enter a user name.
8. Press [File Name].
9. Enter a file name, and then press [OK].
10. Press [Password].
11. Enter a password with the number keys, and then press [OK].
You can use four to eight digits for the password.
12. For double-check, enter the password again, and then press [OK].
13. Place the original.
14. Select the paper tray.
15. Specify the original scanning conditions.
16. Press [Start].
The original is scanned. The document is saved in the Document Server.
6. Document Server
168
To Next Page
Loading...
