Message Cause Solution
"Duplex Cancelled" Duplex printing was
canceled.
Change the setting for "Apply
Duplex" in [Tray Paper Settings] to
enable duplex printing for the paper
tray. For details about setting "Apply
Duplex", see "Tray Paper Settings",
Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
Reduce the number of pages to print.
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is
limited.
Specify the proper output tray.
"Print Overrun" Images were discarded while
printing.
Select a lower resolution on the
printer driver. For details about how
to change the resolution setting, see
the printer driver Help.
When documents cannot be stored in the Document Server
Message Cause Solution
"Cannot store data of this
size."
The paper size exceeded
the capacity of the
Document Server.
Reduce the paper size of the file that
you want to send to a size that the
Document Server can store. Custom
size files can be sent but not stored
afterward.
"Document Server is not
available to use. Cannot
store."
You cannot use the
Document Server function.
For details about using Document
Server function, contact your
administrator.
For details about how to set
permissions, see "Limiting Available
Functions", Security.
"Exceeded max capacity of
document server. Cannot
store."
The hard disk became full
after a file was stored.
Delete some of the files stored in the
Document Server or reduce the size
that you want to send.
9. Troubleshooting
230
To Next Page
Loading...
