Ricoh IM430 Series - Page 55

2. Make a loop at a distance of a few centimeters (1) from each end of the Ethernet interface
cable, and then attach to each loop the ferrite core provided with the USB Device Server
Option.
1
1
BZU010
3. Connect the Ethernet interface cable to the Ethernet port of the USB Device Server Option.
You can use either a straight or crossover Ethernet cable for connecting to the USB Device Server
Option.
DVL803
4. Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.
It may take several seconds for the machine to recognize the USB Device Server Option. If you
have disconnected the USB cable, connect the USB cable again.
Installing the USB device server
53