No. Icon Description
14
Press to add a destination.
Destinations can be added as follows:
• Input destinations manually
• Select from the transmission history
• Specify a registration number from the
Address Book
• Search for a destination in the Address
Book or on the LDAP server
• Press to display the Remaining Memory
Information
You can also add a destinations to the Address
Book.
[Settings] screen
You can switch the three screens described in this section by flicking the screen up or down.
The items on the screen vary depending on the machine’s settings.
No. Icon Description
1
You can switch to immediate transmission mode.
How to Use Each Application
79
To Next Page
Loading...
