SERVICE PROGRAM MODE 1 March, 2000
4-20
SP No. Display
Function
Default
User
Tools
1-080 Misfeed Setting Counter
Number of times the user
changed the ‘Misfeed’ or
‘Multifeed’ settings for
paper feed or separation
pressures
0-
1-081 Multifeed Setting Count
0-
1-082 Start Error Message Cnt.
Number of times an error
message appeared when
the Start key was pressed
0-
1-090
Move Counter Back Plate
This shows how many
times the back plate in the
tandem tray has moved.
0-
1-091
Adjust Counter PDTable
This shows how many
times the side and end
plates in the delivery table
have moved.
0-
1-100
OpenCounter Cover On
Move
Counts how often the sorter
cover is open and shut
0-
1-102-1
Jam DF Feed-in Error
0-
1-102-2
Jam DF Feedout Error
Counters for various types
of jams
0-
1-104-1
Jam Master Set Error
0-
1-104-2
Jam Master Clamp Error
0-
1-104-3
Jam Master Cut Error
0-
1-106-1
Jam Master Eject ON Chk
0-
1-106-2
Jam Pressure Plate Error
0-
1-106-3
Jam Master Eject OFF Chk
0-
1-107-1
Jam Regist ON Check
0-
1-107-2
Jam Feed Timing ON
Check
0-
1-107-3
Jam Feed Timing OFF Chk
0-
1-107-4
Jam Paper Upper Wrapping
0-
1-107-5
Jam Paper Lower Wrapping
0-
1-107-6
Jam Paper Exit OFF Check
0-
1-202-1
Jam% DF Feed-in Error
0-
1-202-2
Jam% DF Feed-out Error
Jam ratios for various types
of jam
0-
1-204-1
Jam% Master Set Error
0-
1-204-2
Jam% Master Clamp Error
0-
1-204-3
Jam% Master Cut Error
0-
1-206-1
Jam% Master Eject ON Chk
0-
1-206-2
Jam% Press Plate Error
0-
1-206-3
Jam% M Eject OFF Check
0-
1-207-1
Jam% Regist ON Check
0-
1-207-2
Jam% Feed Timing ON Chk
0-
1-207-3
Jam% Feed Timing OFF
Chk
0-
1-207-4
Jam% Paper Upper Wrap
0-
To Next Page
Loading...
