20 February, 2001 USING SERVICE PROGRAM MODES
5-47
Service
Tables
5.1.13 SERIAL NUMBER INPUT (SP5-811)
Used to input the machine’s serial number (this is normally done at the factory).
The numeric keypad has 12 buttons. Use the first 11 buttons " to +, ! and #
to input the serial number (' is not used). Each button represents one digit of the
serial number. Press consecutively to get the required letter/number. The first 4
buttons allow you to scroll through numbers 0 to 9 and “A” to “Z”. Buttons 5 to 11
only scroll through numbers 0 to 9.
",-
1st digit 2nd digit 3rd digit
./0
4th digit 5th digit 6th digit
$1+
7th digit 8th digit 9th digit
! #'
10th digit 11th digit Not used
To Next Page
Loading...
