OTHER REPLACEMENTS 20 February, 2001
3-48
3.12.10 GEARBOX
Replacement Procedure
1. BiCU (☛ 3.12.4)
2. BiCU bracket [A] (! x 3)
3. Main motor (☛ 3.12.6)
4. Exhaust fan (☛ 3.12.7)
5. Remove the IOB with bracket (☛
3.12.5)
6. Crosspiece [B] (! x 4)
7. Registration clutch (☛ 3.8.8)
8. Open the clamp [C] on the gearbox,
and take out the wires.
9. Gearbox [E] (! x 5, 1 belt)
NOTE: When reinstalling, set the
belt onto the gearbox side
first (at [F]), hold it taut,
and fit the gearbox into
place so that the belt fits
over the corresponding
gear on the main unit.
Handle the gearbox
carefully so that the gears
don't fall out.
B039R932.WMF
B039R919.WMF
B039R916.WMF
[A]
[B]
[C]
[E]
[D]
[F]
To Next Page
Loading...
