Ricoh K-C1 - Test Pattern Printing (Sp5-902)

20 February, 2001 USING SERVICE PROGRAM MODES
5-31
Service
Tables
5.1.2 TEST PATTERN PRINTING (SP5-902)
1. Input the class-3 number for the test pattern you need.
2. Press & to access the copy mode display.
3. Select the required copy features such as paper size, image density, and
reproduction ratio.
4. Press & again to print the test pattern.
5. After checking the test pattern, press ! key to exit from copy mode.
6. Exit SP mode.
No. Test Pattern using VCU
0No Print
1 Vertical Lines (single dot)
2 Horizontal Lines (single dot)
3 Vertical Lines (double dot)
4 Horizontal Lines (double dot)
5 Grid Pattern (single dot)
6 Grid Pattern (double dot)
7 Alternating Dot Pattern
8 Solid Black
9 Black Band
10 Trimming Area
11 Argyle Pattern
12 Grayscales (Horizontal)
13 Grayscales (Vertical)
14 Grayscales
(Vertical/Horizontal)
15
Grayscales
(Vertical/Horizontal Overlay)
16 Grayscales with white lines
(Horizontal)
17 Grayscales with white lines
(Vertical)
18 Grayscales with white lines
(Vertical/Horizontal)
No. Test Pattern using IPU
31 Vertical Lines (single dot)
32 Horizontal Lines (single dot)
33 Vertical Lines (double dot)
34 Horizontal Lines (double dot)
35 Alternating Dot Pattern
36 Grid Pattern (single dot)
37 Vertical Stripes
38 Grayscales (Horizontal)
39 Grayscales (Vertical)
40 ID Patch
41 Cross Pattern
42 Argyle Pattern
43 Trimming Area
No. Test Pattern using SBU
51 Vertical Lines (double dot)
52 Grid Pattern (single dot)
53 16 Grayscales