USING SERVICE PROGRAM MODES 20 February, 2001
5-26
SP7-XXX (Data Log)
7
Mode Number/Name Function/[Setting]
Total Operation Time001*
Displays the total operation time (total drum rotation time).
Counter – Original
1 Total Displays the total number of scanned originals (total).
2 Copier Displays total number of scanned originals (copy mode
only).
002*
3 Fax Displays total number of scanned originals (fax mode
only).
Counter – Print
1 Total Displays the total number of prints (total).
2 Copier Displays the total number of prints (copier mode).
3 Fax Displays the total number of prints (fax mode).
4 Printer Displays the total number of prints (printer mode).
003*
5 A3/DLT Displays the total number of prints (A3/DLT).
Counter – Paper Size
1A3
2B4
3A4
4B5
5DLT
6LG
7LT
8HLT
101*
9 Others
Displays the total number of copies by paper size.
Counter – By-pass Print
1 Special Displays the total number of special paper prints fed from
the by-pass tray.
102*
2 Thick Displays the total number of thick paper prints fed from
the by-pass tray.
Counter - Total Scan (Non DF)201*
Displays the total number of scanned originals (not from
the DF).
Counter - Printouts by Paper Tray
11st
2 2nd
33rd
44th
5By-pass
204*
6 Duplex
Displays the total number of sheets fed from each paper
feed station.
Counter – ADF205*
Displays the total number of originals fed by the ADF.
Display – APS Working Time (Cumm.)211*
Displays the accumulated APS working time.
Display – ID Sensor Working Time (Cumm.)212*
Displays the accumulated ID sensor working time.