TRAY HEATERS 20 February, 2001
1-26
6. Clamp the cables [A], as shown.
7. Join the connectors [B].
8. Two-tray unit only: Reinstall the cable
guide.
9. One-tray copier model (B039):
Remove the 1st tray cassette.
Two-tray copier models
(B040/B043):
Remove the 2nd tray cassette.
10. Remove the two screws [C] and
install the two hexagonal socket
screws [D].
11. Reinstall the 1st tray and rear cover.
B039I008.WMF
B039I006.WMF
B039I003.WMF
[C]
[D]
- One-tray paper feed unit -
[B]
[A]
[C]
- Two-tray paper feed unit -
[B]
[B]
[A]
To Next Page
Loading...
