Ricoh M C240FW - Network;Ports; Network Overview

Use printer menus 119
Network/Ports
Network Overview
Menu item
Description
Active Adapter
Auto*
Standard Network
Wireless
Specify the type of the network connection.
Network Status
Show the connectivity status of the printer network.
Display Network Status on Printer
Off
On*
Show the network status on the display.
Speed, Duplex
Show the speed of the currently active network card.
IPv4
Show the IPv4 address.
All IPv6 Addresses
Show all IPv6 addresses.
Reset Print Server
Start
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Network Job Timeout
Disabled
Enabled*
Set the time before the printer cancels a network print job.
Network Job Timeout Time
Specify the timeout value (in seconds) when the Network Job Timeout setting is
enabled.
Note: This feature is available only in some printer models.
Banner Page
Off*
On
Print a banner page.
Scan to PC Port Range
Specify a valid port range for printers that are behind a port blocking firewall.
Enable Network Connections
Enable*
Disable
Enable or disable all network connections.
Enable LLDP
Off*
On
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.