Ricoh M C240FW - Usb

Use printer menus 131
Menu item
Description
Enable HTTPS
Off
On*
Configure the Hypertext Transfer Protocol Secure (HTTPS) settings.
Force HTTPS Connections
On
Off*
Force the printer to use the HTTPS connections.
Enable FTP/TFTP
Off
On*
Send files using FTP.
Local Domains
Specify domain names for HTTP and FTP servers.
Note: This menu item appears only in the Embedded Web Server.
HTTP Proxy IP Address
Configure the HTTP and FTP server settings.
FTP Proxy IP Address
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP Requests
1–299 (30*)
Specify the amount of time before the server connection stops.
Retries for HTTP/FTP Requests
1–299 (3*)
Set the number of retries to connect to the HTTP/FTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item
Description
PCL SmartSwitch
Off
On*
Set the printer to switch to PCL emulation when a print job received through a USB
port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming data
and uses the default printer language specified in the Setup menu.