Learn about the printer 18
Selecting preprinted forms and letterhead
• Use grain long paper.
• Use only forms and letterhead printed using an offset lithographic or engraved printing process.
• Avoid paper with rough or heavily textured surfaces.
• Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet
these requirements; latex inks might not.
• Print samples on preprinted forms and letterheads considered for use before buying large quantities. This
action determines whether the ink in the preprinted form or letterhead affects print quality.
• When in doubt, contact your paper supplier.
• When printing on letterhead, load the paper in the proper orientation for your printer.
Supported paper sizes
sheet tray
feeder
printing
210 x 297 mm (8.27 x 11.7 in.)
A5
148 x 210 mm (5.83 x 8.27 in.)
X
105 x 148 mm (4.13 x 5.83 in.)
X
182 x 257 mm (7.17 x 10.1 in.)
X
215.9 x 340.4 mm (8.5 x 13.4 in.)
X
100 x 148 mm (3.94 x 5.83 in.)
X X
139.7 x 215.9 mm (5.5 x 8.5 in.)
X
184.2 x 266.7 mm (7.25 x 10.5 in.)
X
215.9 x 279.4 mm (8.5 x 11 in.)
To Next Page
Loading...
