Ricoh M C240FW - Scheduling a Fax; Creating a Fax Destination Shortcut; Changing the Fax Resolution; Adjusting the Fax Darkness

Fax 64
Scheduling a fax
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax > To > enter the fax number > Done.
3 Touch Send Time, configure the date and time, and then touch OK.
4 Send the fax.
Creating a fax destination shortcut
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 From the home screen, touch Fax > To.
2 Enter the recipient number, and then touch Done.
3 Touch .
4 Create a shortcut.
Changing the fax resolution
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touch Resolution, and then adjust the setting.
4 Send the fax.
Adjusting the fax darkness
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touch Darkness, and then adjust the setting.
4 Send the fax.
Printing a fax log
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 From the home screen, touch Settings > Reports > Fax.
2 Touch Fax Job Log or Fax Call Log.