Ricoh M C240FW - Blocking Junk Faxes; Holding Faxes; Forwarding a Fax

Fax 65
Blocking junk faxes
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 Set Block No Name Fax to On.
Holding faxes
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
3 Select a mode.
4 Apply the changes.
Forwarding a fax
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax.
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 Touch Fax Forwarding > Forward.
3 Configure the Forward to and Confirmation E-mail settings.