Ricoh M C240FW - Scanning to a Network Folder Using a Shortcut; Scanning to a Flash Drive

Scan 68
Scanning to a network folder using a shortcut
1 Create a network folder shortcut.
a. Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
b. Click Shortcuts > Add Shortcut.
c. From the Shortcut Type menu, select Network Folder, and then configure the settings.
d. Apply the changes.
2 Load an original document into the ADF tray or on the scanner glass.
3 From the home screen, touch Shortcuts > Scan to Network.
4 Select the shortcut.
Scanning to a flash drive
This feature is available only in some printer models.
1 Load an original document into the ADF tray or on the scanner glass.
2 Insert the flash drive.
3 Touch Scan to USB and adjust the settings if necessary.
Notes:
• To save the scanned document to a folder, touch Scan to, select a folder, and then touch Scan Here.
• If the USB Drive screen does not appear, then touch USB Drive on the control panel.