Ricoh M C240FW - Scanning to an FTP Server Using a Shortcut

Scan 67
For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see Adding printers to a
computer.
1 Load an original document into the automatic document feeder or on the scanner glass.
2 From the computer, do either of the following:
• Open Image Capture.
• Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3 From the Scanner window, do one or more of the following:
• Select where you want to save the scanned document.
• Select the size of the original document.
• To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
• If necessary, configure the scan settings.
4 Click Scan.
Scanning to an FTP server using a shortcut
1 Create an FTP shortcut.
a. Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
b. Click Shortcuts > Add Shortcut.
c. From the Shortcut Type menu, select FTP, and then configure the settings.
d. Apply the changes.
2 Load an original document into the ADF tray or on the scanner glass.
3 From the home screen, touch Shortcuts > FTP
4 Select the shortcut.