EasyManua.ls Logo

Ricoh M C240FW - Installing and Updating Software, Drivers, and Firmware; Installing the Printer Software; Installing the Fax Driver; Adding Printers to a Computer

Ricoh M C240FW
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Set up, install, and configure 45
Installing and updating software, drivers, and firmware
Installing the printer software
Notes:
The print driver is included in the software installer package.
For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to print on an
AirPrint-certified printer.
1 Obtain a copy of the software installer package.
From the software CD that came with your printer.
From our following website or the place where you purchased the printer.
https://support.ricoh.com/bb/html/dr_ut_e/re2/model/mc240fw/mc240fw.htm
2 Run the installer, and then follow the instructions on the computer screen.
Installing the fax driver
1 Go to our following website or the place where you purchased the printer, and then obtain the installer
package.
https://support.ricoh.com/bb/html/dr_ut_e/re2/model/mc240fw/mc240fw.htm
2 Run the installer, and then follow the instructions on the computer screen.
Adding printers to a computer
Before you begin, do one of the following:
Connect the printer and the computer to the same network. For more information on connecting the printer to
a network, see Connecting the printer to a Wi-Fi network.
Connect the computer to the printer. For more information, see Connecting a computer to the printer.
Connect the printer to the computer using a USB cable. For more information, see Attaching cables.
Note: The USB cable is sold separately.
For Windows users
1 From a computer, install the print driver.
Note: For more information, see Installing the printer software.
2 Open Printers & scanners, and then click Add a printer or scanner.
3 Depending on your printer connection, do one of the following:
Select a printer from the list, and then click Add device.
Click Show Wi-Fi Direct printers, select a printer, and then click Add device.
Click The printer that I want isn’t listed, and then from the Add Printer window, do the following:
1. Select Add a printer using a TCP/IP address or hostname, and then click Next.
2. In the “Hostname or IP address” field, type the printer IP address, and then click Next.

Table of Contents

Related product manuals