E-mail 61
E-mail
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
• Use the ADF for multiple-page or two-sided documents.
• Load an original document faceup. For multiple-page
documents, make sure to align the leading edge before
loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single-page documents,
book pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as
magazine clippings).
• Place the document facedown in the corner with the
arrow.
Sending an e-mail
Before you begin, make sure that the SMTP settings are configured. For more information, see Configuring the e-
mail SMTP settings.
Using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch E-mail, and then enter the needed information.
3 If necessary, configure the output file type settings.
4 Send the e-mail.
Using a shortcut number
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Shortcuts > E-mail.
3 Select the shortcut number.
4 Send the e-mail.
To Next Page
Loading...
