Ricoh M C240FW - Scan; Scanning to a Computer

Scan 66
Scan
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
Scanner glass
• Use the ADF for multiple-page or two-sided documents.
• Load an original document faceup. For multiple-page
documents, make sure to align the leading edge before
loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single-page documents,
book pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as
magazine clippings).
• Place the document facedown in the corner with the
arrow.
Scanning to a computer
Before you begin, make sure that:
• The printer firmware is updated. For more information, see Updating firmware.
• The computer and the printer are connected to the same network.
For Windows users
Note: Make sure that the printer is added to the computer. For more information, see Adding printers to a
computer.
1 Load an original document into the automatic document feeder or on the scanner glass.
2 From the computer, open Windows Fax and Scan.
3 From the Source menu, select a scanner source.
4 If necessary, change the scan settings.
5 Scan the document.