Copy 58
Copy
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
• Use the ADF for multiple-page or two-sided documents.
• Load an original document faceup. For multiple-page
documents, make sure to align the leading edge before
loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single-page documents,
book pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as
magazine clippings).
• Place the document facedown in the corner with the
arrow.
Making copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper size.
2 From the home screen, touch Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Copy the document.
Note: To make a quick copy, from the control panel, press .
Copying photos
1 Place a photo on the scanner glass.
2 From the home screen, touch Copy > Content Type > Photo.
3 Copy the document.
To Next Page
Loading...
