Ricoh M C240FW - Page 160

Troubleshoot a problem 160
Action
Yes
No
Step 3
1 Turn off Color Saver.
From the control panel, navigate to:
Settings > Print > Quality > Color Saver.
2 Print the document.
Is the print light?
Go to step 4.
The problem is
solved.
Step 4
1 Depending on your operating system, specify the paper type from the
Printing Preferences or Print dialog.
Notes:
• Make sure that the setting matches the paper loaded.
• You can also change the setting on the printer control panel.
Navigate to Settings > Paper > Tray Configuration > Paper
Size/Type.
2 Print the document.
Is the print light?
Go to step 5.
The problem is
solved.
Step 5
Check if paper has texture or rough finishes.
Are you printing on textured or rough paper?
Go to step 6.
Go to step 7.
Step 6
1 Replace textured or rough paper with plain paper.
2 Print the document.
Is the print light?
Go to step 7.
The problem is
solved.
Step 7
1 Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you are ready to use it.
2 Print the document.
Is the print light?
Go to step 8.
The problem is
solved.