Ricoh M C240FW - Page 99

Use printer menus 99
Advanced Imaging
Menu item
Description
Color Balance
Cyan - Red
-4 to 4 (0*)
Magenta - Green
-4 to 4 (0*)
Yellow - Blue
-4 to 4 (0*)
Adjust the color intensity during scanning.
Contrast
Best for Content*
0
1
2
3
4
5
Set the contrast of the output.
Background Removal
Level
-4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
On
Off*
Allow edge-to-edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Description
Automatic Redial
0–9 (5*)
Adjust the number of redial attempts based on the activity levels of recipient fax
machines.
Redial Frequency
1–200 minutes (3*)
Increase the time between redial attempts to increase the chance of sending fax
successfully.
Enable ECM
On*
Off
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the fax transmission process caused by
telephone line noise and poor signal strength.