NCU Parameters
D649 130 SM
Address Function Unit Remarks
68055D PSTN access pause time 20 ms
This time is waited for
each pause input after
the PSTN access code.
If this address contains
FF[H], the pause time
stored in address
68054F is used.
Do not set a number
more than 7 in the UK.
68055E
Progress tone detection level, and
cadence detection enable flags
Bit 7: 0, Bit 6: 0, Bit 5: 0 = -25.0 dBm
Bit 7: 0, Bit 6: 0, Bit 5: 1 = -35.0 dBm
Bit 7: 0, Bit 6: 1, Bit 5: 0 = -30.0 dBm
Bit 7: 1, Bit 6: 0, Bit 5: 0 = -40.0 dBm
Bit 7: 1, Bit 6: 1, Bit 5: 0 = -49.0 dBm
Bits 2, 0 - See Note 2.
68055F
To
680564
Not used
-
Do not change the
settings.
680565 Long distance call prefix (HIGH) BCD For a code of 0:
680565 – FF
680566 - FF
680566 Long distance call prefix (LOW) BCD
680567
to
680571
Not used
-
Do not change the
settings.
680572
Acceptable ringing signal
frequency: range 1, upper limit
1000/ N
(Hz).
SP2-103-003
(parameter 02).
680573
Acceptable ringing signal
frequency: range 1, lower limit
SP2-103-004
(parameter 03).
680574
Acceptable ringing signal
frequency: range 2, upper limit
SP2-103-005
(parameter 04).
680575
Acceptable ringing signal
frequency: range 2, lower limit
SP2-103-006
(parameter 05).