Ricoh MP C305SPF User Manual

Main SP Tables-5
D117/D118 3-310 SM Appendix
004 Attack Max Num *CTL
Sets a limit on the number of requests
received for certification in order to
slow down the certification speed
when an excessive number of access
attempts have been detected.
[50 to 200 / 200 / 1attempt/step]
5420
[User Authentication]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been
enabled.
001 Copy *CTL
Determines whether certification is
required before a user can use the
copy applications.
[0 or 1 / 0 / 1/step]
0: Authentication ON
1: Authentication OFF
002 Color Security Setting CTL
Enables or disables the color copy
limitation for each copy mode when
the user authentication is "ON"
[0x00 to 0xFF / 0 / 1/step]
0: Enable, 1: Disable
Bit0: B/W mode
Bit1: Mono color mode
Bit2: Two colors mode
Bit3: Full color mode
Bit4: Automatic color mode
Bit5 to 7: Reserved
011 DocumentServer *CTL
Determines whether certification is
required before a user can use the
document server.
[0 or 1 / 0 / 1/step]
0: Authentication ON
1: Authentication OFF

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux