Ricoh MP C305SPF User Manual

Fusing
SM 4-89 D117/D118
Replacement
and
Adjustment
4.11.13 ACTIONS WHEN SC554-00 OCCURS
Basically, the entire fusing unit must be replaced when SC554-00 occurs. However, it is possible
to continue to use the old fusing unit when there is no damage found when you inspect the fusing
unit in accordance with the flow chart shown below.
*1: a) Do not use SP 3-701-014 to reset the fusing unit counter manually when doing the above
reset procedure for SC554-00. b) Do not open the door when doing the procedure in this flow
chart (“SC reset failure” will be shown.). The SC reset will be successful if the fuse for new fusing
unit detection is blown if the machine door is open during the SC reset, and it will not be
successful if it is not blown. The SC reset should be performed again if it fails.
“SC reset failure” will be shown when this SP (SP5-810-002) is executed if an SC other than
SC554-00 occurred.

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux