Ricoh MP C305SPF User Manual

Main SP Tables-5
SM Appendix 3-385 D117/D118
Appendix:
SP Mode
Tables
5894 [External Counter Setting]
001 Switch Charge Mode *ENG [0 to 2 / 0 / 1/step]
5907 [Plug & Play Maker/Model Name]
001
Plug & Play
Maker/Model/Name
*CTL See detail below
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
002
Print Application Timer *CTL [3 to 30 / 3 / 1sec/step]
Sets the amount of time to elapse while the machine is in standby mode (and
the operation panel keys have not been used) before another application can
gain control of the display.
5919 [State Of Encryption]
001
State Of Encryption *CTL
[0 or 1 / 0 / 1/step]
0: OFF (Not working)
1: ON (Working)

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux