Ricoh MP C305SPF User Manual

Controller Options
D117/D118 2-106 SM
2. Install the gigabit Ethernet LAN board [A] (Knob [B] x 2) into the board slot.
3. Install the Ethernet connector and USB type B connector cover included in the Gigabit
Ethernet board kit on the 100M bit LAN connector [C] and the USB connector type B [D].
4. Attach the ferrite core [A] (included in the kit) to the Ethernet cable of the gigabit ethernet LAN
card as shown above.
5. Check the operation of the Gigabit Ethernet
2.14.12 CHECK ALL CONNECTIONS
1. Plug in the power cord. Then turn on the main switch.
2. Enter the printer user mode. Then print the configuration page.
User Tools
Printer Settings List Test Print Config. Page
All installed options are shown in the "System Reference" column.

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux