Ricoh MP C305SPF User Manual

SC Tables
D117/D118 6-22 SM
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
492 C
High voltage power: Image transfer/ paper transfer bias output error
An error signal is detected for 200 ms when charging the separation,
image transfer belt or paper transfer roller.
 High voltage leak
 Broken harness
 Defective image transfer belt unit or paper transfer unit
 Defective high voltage supply unit
1. Check or replace the harness.
2. Reinstall or replace the image transfer belt unit or paper transfer unit.
3. Replace the high voltage supply unit.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
497 C
Image creation temperature sensor error 1
The thermistor output of the temperature sensor is not within the
prescribed range (more than 0.5 V to less than 3.0 V) for three
consecutive times.
-
1. Turn the power switch off and on.

Ricoh MP C305SPF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed, ADF
Fax Speed	33.6 Kbps
Print Speed	30 ppm
Paper Capacity	350 sheets
Paper Size	A4, A5, A6, B5
Fax Transmission Speed	Approximately 3 seconds per page
Operating System Compatibility	Windows, Mac, Linux