Main SP Tables-7
SM Appendix 3-405 D117/D118
Appendix:
SP Mode
Tables
7803 [PM Counter Display] (Page, Unit, [Color])
081 to
086
Displays the value given by the following formula:
(Current revolution / Target revolution)
100. This shows how much of the
unit's expected lifetime has been used up.
The Rotation% counter is based on rotations, not prints. If the number of
rotations reaches the limit, the machine enters the end condition for that unit. If
the print count lifetime is reached first, the machine also enters the end
condition, even though the R% counter is still less than 100%.
ENG
[0 to 255 / - / 1 %/step]
081 Rotation (%): Fusing Pad
082 Rotation (%): Lubricant: PCU: K
083 Rotation (%): Lubricant: PCU: C
084 Rotation (%): Lubricant: PCU: M
085 Rotation (%): Lubricant: PCU: Y
086 Rotation (%): Lubricant: Image Transfer
7803 [PM Counter Display] (Page, Unit, [Color])
091 to
108
Displays the value given by the following formula:
(Target printouts / Current printouts)
100. This shows how much of the unit's
expected lifetime has been used up.
The Page% counter is based on printouts, not revolutions. If the number of
printouts reaches the limit, the machine enters the end condition for that unit. If
the revolution count lifetime is reached first, the machine also enters the end
condition, even though the Page% counter is still less than 100%.
ENG
[0 to 255 / - / 1 %/step]
091 Page (%): PCU: K
092 Page (%): PCU: C
093 Page (%): PCU: M
094 Page (%): PCU: Y
To Next Page
Loading...
Need help?
General
