Registering Addresses and Users for Facsimile/Scanner Functions
214
7
I Select [SMB] using {U} or {T}, and then press the {OK} key.
J Select [Manual Entry] or [Browse Network] to specify the path entry method us-
ing {U} or {T}, and then press the {OK} key.
To specify a folder, you can either enter the path manually or locate the folder
by browsing the network. See "Locating the folder manually" and "Locating
the folder using Browse Network".
K Specify the folder.
L Press [Com.Test] to check the path is set correctly.
M Press [Exit].
N Press the {Escape} key.
To Next Page
Loading...
