Ricoh MP161SPF - Displaying the Counter for each User Code

System Settings
78
2
Displaying the Counter for Each User Code
You can check the counter for each user code.
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Key Operator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Counter per User Code] using {U} or {T}, and then press the {OK} key.
D Select [Display] using {U} or {T}, and then press the {OK} key.
The counter for each user code will be displayed.
E Press the {User Tools/Counter} key.