Ricoh MP161SPF - IP-Fax Settings

System Settings
80
2
Clearing the Number of Prints
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Key Operator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Counter per User Code] using {U} or {T}, and then press the {OK} key.
D Select [Clear] using {U} or {T}, and then press the {OK} key.
E Press [Yes].
The “Counter has been cleared.” message appears, and then the
“Codes:Counters” display returns.
F Press the {User Tools/Counter} key.