Tray Paper Settings
45
2
❖ Paper Type: Paper Tray 1-2
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
• The paper types you can set are as follows:
No Display (Plain Paper), Recycled Paper, Special Paper, Color Paper, Let-
terhead, Preprinted Paper, Prepunched Paper, Bond Paper, Cardstock
The default setting for "Paper Type" is No Display (Plain Paper).
The default setting for "APS" is On.
The default setting for "Duplex" is On.
To enable the Auto Tray Switching function, make sure [On] is selected in
APS.
❖ Ppr Tray Priority:Copier (copier)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Ppr Tray Priority:Fax (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Ppr Tray Priority:Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
Reference
p.4 “Accessing User Tools”
p.81 “Auto Tray Switching”
To Next Page
Loading...
