Key Operator Tools (For machines with copier function only or with the DDST Unit)
73
2
❖ Display / Print Counter
Allows you to view and print the number of prints.
• Display / Print Counter
Displays the number of prints for each function (Total, Copier, Printer, Du-
plex).
•Print Counter List
Prints out a list of the number of prints made under each function.
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Key Operator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Display / Print Counter] using {U} or {T}, and then press the {OK}
key.
D Press [Print].
E Press the {Start} key.
The Print Counter List is printed.
❖ Counter per User Code
Allows you to view and print the numbers of prints accessed with user codes,
and to set those values to 0.
Press {U} or {T} to show all the numbers of prints.
The number of prints may differ from the counter value shown in Display /
Print Counter.
• Print counter per user code
Prints the number of prints made under each user code.
• Clear counter per user code
Sets the number of prints made under each user code to 0.
Print list for each user code, see "Printing the Counter for Each User Code".
• Print counter for all user codes
Prints the number of prints made under all user codes.
•Clear counter for all user codes
Sets the number of prints made under all user codes to 0.
❖ Program / Change User Code
You can register, change, and delete user codes. For details about these oper-
ations, see "User Code".
You can register up to 50 user codes.
❖ AOF (Always On)
Specify whether or not to use Auto Off.
The default setting is On.
To Next Page
Loading...
